I gave a talk at Anna University today where I spoke about how to use Arduino and Raspberry Pi for Internet of Things. Slides I have uploaded the slides that I used for my talk to my slideshare account. You can download the slides or view them below. You can also checkout my other presentations […]
Last weekend, I gave a talk about using Raspberry Pi’s Serial port in Computer Club’s (read hardware enthusiasts) monthly meetup. Slides I have uploaded the slides that I used for my talk to my slideshare account. You can download the slides or view them below. You can also checkout my other presentations and slides from […]
Recently in Maker Faire Rome, Arduino announced two new Linux based Arduino boards – Galileo in collaboration with Intel (Yes 😉 ) and Arduino TRE in collaboration with Texas Instruments (the company behind BeagleBoard). Together with Arduino Yun, now the total number of official Arduino Linux based boards is 2. Intel Galileo This board is […]
The first question people ask me these days when I talk about either Raspberry Pi or Arduino is what is the difference between them. This was one of the prominent question that people asked me during my recent PyCon talk and Maker Party presentation. Even though both Raspberry Pi and Arduino are created to solve […]
Mozilla India is conducting a Maker Party today at Jaaga and I going to conducting a workshop there. Maker Party ‘Maker Party: Bangalore 2013’ is a Mozilla Hive India initiative in an attempt to map and empower a community of educators and creative people who share a passion to innovate, evolve and change the learning […]
Today, I gave a talk in PyCon India, 2013 about using Python to control the GPIO pins in Raspberry Pi. About PyCon India, 2013 PyCon is an annual conference that happens in India for the Python programming language. Following is the actual quote from PyCon website. PyCon India, the premier conference in India on using […]
I was following news about Maker Faire in Twitter today and was quite surprised when I came to know that Massimo Banzi co-founder of Arduino, announced Arduino Yún, a new product that combines Arduino and Linux. Specification I was quite excited and quickly checked the specs. It is a combination of Arduino Leonardo (based on […]
When I wrote about choosing the correct display cable for Raspberry Pi, I mentioned that you might face problems with getting audio, when you use a cheap HDMI to VGA converter, that doesn’t support audio. Problem I use this cheap HDMI to VGA converter which I bought from Amazon, which doesn’t support audio. I thought […]
When I wrote about choosing the correct accessory for Raspberry Pi, I mentioned that choosing the display cable could get a little tricky. There are a lot of things to keep in mind and so I thought of writing a separate guide for choosing the correct display cable. The following are the different scenario’s which […]
Ever since I bought my Raspberry Pi, people reached out to me asking what are the accessories that I am using with it. It took me a bit of research to find out the best accessories needed for Raspberry Pi and I thought of documenting it so that it is useful for others as well. […]
